Product fractions
Identify each intended material stream and its destination so the deck discussion follows a defined separation task.
ROCKLINE · CR-S3
Mobile Screening
A screening concept for exploring deck layout, mesh requirements and stockpile routing.
- Grading-target intake
- Screen-deck options
- Stockpile-flow layout
THE EQUIPMENT IN CONTEXT
Start with the task.
Specify with clarity.
A screen discussion should start with the products the project needs to separate. The material reaching the screen, including moisture and the range of particle shapes, helps define the topics for media and deck review. Follow each proposed fraction beyond the screen to its stockpile or next process. This keeps the equipment conversation connected to useful material streams rather than a deck count alone.
A nominal opening in screen media is not a complete grading guarantee. Feed presentation, material behavior and the overall arrangement need review together with the intended separation. A crushing or screening stage belongs in a material flow rather than an isolated equipment list. Feed condition, transfers, recirculation and stockpile arrangements affect the proposal. Start with a representative material description and the intended final products. Equipment selection and any production expectations need review against actual site and material conditions.
WHAT TO CONSIDER
The details that make the difference.
Feed condition
Describe moisture, fines and other material behavior that may affect how the feed moves across the proposed screen.
Screen media
Discuss media choice and access for replacement with the actual material and the required separation in view.
Stockpile routing
Show transfers from each output and how separate products remain accessible and identified around the site. Connect this choice to the feed, surrounding stages and intended final fractions rather than treating it in isolation.
CONFIGURATION PLANNING
Shape the setup
around your needs.
Start with these inputs to make your equipment enquiry more specific.
Discuss a Configuration| 01 | Required final fractions and their intended uses. Describe the incoming material and the variation expected between loads. |
|---|---|
| 02 | Feed condition at the proposed screening stage. Keep the intended final fractions visible in the process discussion. |
| 03 | Deck and screen-media arrangement to be reviewed. Include transfer points and stockpile access in the layout review. |
| 04 | Transfers and stockpile layout for each output. Discuss inspection and wear-part access before fixing the arrangement. |
| 05 | Inspection and replacement access around the screen. Ask how the proposed stage will be evaluated with representative material. |
WHERE IT FITS
Put the equipment
into perspective.
- Final aggregate separation into defined product streams.
- Recycling routes with reviewed separation requirements.
- Site-based screening connected to organized stockpiles.
BUYER’S CHECKLIST
A stronger brief.
A useful next step.
01
Which separate fractions must leave the proposed screen?
02
What material condition is expected at the screening stage?
03
Where will each output be stored or processed next?
BEFORE YOU SPECIFY
Questions worth
asking early.
Does the number of decks determine the full result?+
No. Material behavior, media and feed presentation also need review. Begin with the required products and their routes.
Can wet and dry feed be treated identically?+
That should not be assumed. Describe the actual conditions and expected variation so the proposed arrangement can be assessed.
What makes a screening layout useful?+
It should show incoming feed and every output route, including stockpile access and the handling of material needing further processing. The process should be reviewed with the actual material, site layout and required final fractions. A crusher or screen category alone cannot establish finished grading, suitability or production output.
CONNECTED APPLICATIONS
Explore the process behind the equipment.
COMPARE THE RANGE
Other equipment to explore.
Jaw Crusher Concepts
Explore primary-stage crushing around incoming rock, feed presentation and the requirements of the process that follows.
Impact Crusher Concepts
Discuss impact reduction in relation to material behavior, desired product characteristics and the wear implications of the actual feed.
Cone Crusher Concepts
Explore a later-stage reduction discussion around prepared feed, chamber selection and the relationship with screening and recirculation.
LET’S BUILD WHAT’S NEXT